Cold shower in the morning? Nine times out of ten it's a blown element or a failed thermostat — both are same-visit fixes for a licensed electrician. We diagnose on the spot with proper test gear (not guesswork), quote the swap before we start, and typically have you back to hot water inside two hours. If the tank itself is leaking from the base, no amount of repair will save it and we quote a full replacement instead.
For older Sydney homes on off-peak (tariff 31 or controlled load) we handle the whole thing: repair or rewire the controlled-load circuit, fix a stuck contactor, replace a failed off-peak clock, or convert to continuous tariff with the Ausgrid notification handled for you. If you have solar we can install a timer so the tank heats during the middle of the day on your excess PV instead of drawing from the grid overnight.
Heat pump hot water is the biggest upgrade if your tank is on its last legs — around 70% less power than a conventional electric tank, and eligible for NSW rebates. We supply and install Sanden, Reclaim, Rheem Ambiheat and iStore, wire the dedicated circuit from the board, and coordinate with a licensed plumber where the pipework needs work.