# Optical Fibre Splicing & Testing
Canonical URL: https://empireelectricalcontractors.com.au/services/optical-fibre
Empire Electrical Contractors · Phone +61468404608 (24/7)

Fusion splicing, OTDR testing and OS2/OM4 fibre install

Fibre backbone, splicing, OTDR testing and MPO/LC termination for commercial and industrial sites. Registered ACMA cablers with fibre endorsement.

## What's included
- OS2 single-mode and OM3/OM4 multi-mode installs
- Fusion splicing to enclosures, patch panels and cabinets
- OTDR and light-source/power-meter test reports
- MPO/MTP, LC, SC and ST termination
- Existing fibre link fault finding
- As-installed drawings and certified test results

## Overview
Fibre optic cabling is the backbone of every serious commercial network — data centre uplinks, building risers, campus backbones, industrial control networks — and it only works if it's spliced, terminated and tested properly. We hold ACMA cabler registration with fibre endorsement, own the fusion splicer, OTDR and light-source/power-meter, and deliver certified test reports on every job.
Typical Sydney projects include running OS2 single-mode risers up an office building for a tenancy fit-out, splicing MPO ribbon fibre in a data cabinet for a new switch stack, terminating LC patch panels for a comms room refresh, and diagnosing intermittent packet loss on an existing fibre link with an OTDR trace. Every link gets a bi-directional test report we hand over as part of the commissioning package.
For industrial and roadside sites we also handle fibre fault repair — locating the break with an OTDR, exposing the buried duct, re-splicing and re-testing the link, and documenting the repair for the asset owner.

## Fixed pricing
$1,200–$25,000 AUD per project. Workmanship warranty 24 months. Typical on-site duration ~8 hours.

## Symptoms we hear about
- Building requiring multi-tenant fibre backbone
- Ageing OM1 fibre limiting speeds
- New commercial fitout needing OS2 runs

## Common causes
- Legacy multimode fibre
- Riser cabling at capacity
- No fibre patching in comms room

## How we handle it
1. **Design** — Route survey, fibre type and termination method confirmed.
2. **Pull and terminate** — OS2 or OM4 fibre pulled through risers and terminated to LC/SC patch panels.
3. **Splice and test** — Fusion splice where required, OTDR test each strand and produce test report.
4. **Handover** — Patching schedule, cable ID labels and OTDR trace report supplied.

## Applicable standards
- AS/CA S008 — Customer cabling
- ISO/IEC 11801 — Generic cabling

## FAQs
**Do you provide certified OTDR test reports?**
Yes — every link is bi-directionally OTDR-tested and light-source/power-meter tested, and a PDF certified test report is issued as part of the hand-over.

**OS2 single-mode or OM4 multi-mode — which should we use?**
OS2 is the default for anything over ~300m, building risers, campus backbones and future-proofing. OM4 makes sense for short data-cabinet runs using existing multi-mode SFPs. We'll spec against your active kit and design.

**Can you splice MPO ribbon fibre?**
Yes — ribbon fusion splicing to MPO/MTP cassettes and enclosures is core scope, especially for data-cabinet builds and 40/100G uplink stacks.

**How is a fibre install priced?**
Priced per link, per splice and per termination — the OTDR test and certified report are included, never a line-item add-on.

**Can you locate and repair a fibre break?**
Yes — OTDR trace to locate the break, expose the affected section of duct or riser, re-splice, re-test and hand over the repair record.

**Are you registered for fibre cabling in Australia?**
Yes — registered ACMA cabler with fibre endorsement, which is legally required for any fibre install in Australia.

## Reviews
Aggregate: 5/5 across 195 Google reviews.
- Shirish Shetty (5/5, 2026-06-01): Absolutely outstanding electrician and genuinely one of the best people to work with. He diagnosed and fixed the issue within a couple of hours. He was professional, efficient, and reliable.
- Jie Z (Jessica) (5/5, 2026-06-01): VERY HIGHLY recommend! We had an issue with power at home and needed someone urgently to restore the electricity service. They responded quickly, showed up on time, and got everything back up and running without any hassle.
- Vin J (5/5, 2026-03-01): I highly recommend Joe, he's very skilled, kind and does honest work. He did a massive last minute job for us, installing an entire 17.4kw ducted aircon system after our old unit broke.
- Jennifer Cornish (5/5, 2025-11-01): Exceptional Service - Highly Recommend! I contacted Joe from Empire Electrical to install new powerpoints and downlights. His professionalism, punctuality, and thoroughness stood out.
- Jasmin Cumming (5/5, 2025-07-01): I am so glad I called Empire Electrical. Joe is a very honest person which is hard to come by. He explained everything to me and charged me an incredibly fair price.