# EV Charger Installation — Hurlstone Park, NSW 2193
Canonical URL: https://empireelectricalcontractors.com.au/services/ev-chargers/hurlstone-park
Empire Electrical Contractors · Phone +61468404608 (24/7)

Home EV chargers installed properly, first time

Charge overnight at home. We install Tesla, Wallbox, Ocular, Zappi and every major AC wall charger - properly wired from the switchboard with the right protection and load management.

## Local context
Hurlstone Park sits in Canterbury-Bankstown, Sydney. Postcode 2193, coordinates -33.9083, 151.13.
Common property types: Federation cottages, Californian bungalows.
We also service: Campsie, Kingsgrove, Earlwood, Canterbury.

## What's included
- Tesla Wall Connector installation (Gen 2 & Gen 3)
- Wallbox, Ocular, Zappi, Fronius supply and install
- 7kW single-phase and 22kW three-phase wiring
- Dedicated RCBO circuit direct from the switchboard
- Load balancing / dynamic management setup
- Solar-diverting EV chargers for max self-consumption

## Overview
A home EV charger is the difference between plugging in at night and never thinking about range, versus queuing at a public DC fast charger every week. We install every major AC wall charger — Tesla Wall Connector, Wallbox Pulsar, Ocular, Zappi, Fronius Wattpilot — properly wired from the switchboard on a dedicated RCBO with the right protection, not piggybacked off a general power circuit.
For most Sydney homes a 7kW single-phase install is the sweet spot: it adds around 40km of range per hour, works on standard 240V, and doesn't need a three-phase upgrade. If you have three-phase already, or you drive high daily kilometres, 22kW three-phase gets you a full charge in 3-4 hours. Where a home has solar we can install a diverting charger (Zappi, Fronius Wattpilot) that charges the car only from excess solar — turning free daytime PV into free km.
Every install includes an on-site assessment of your switchboard, the cable run, mounting location and phase capacity. We handle any switchboard upgrade needed, Ausgrid notification for high-demand connections, and load balancing so the charger throttles down instead of tripping the main. Certificate of Compliance is issued on completion — a legal requirement in NSW that DIY installs cannot provide.

## Fixed pricing
$900–$1,600 AUD installed. Workmanship warranty 24 months. Typical on-site duration ~4 hours.

## Symptoms we hear about
- 15 A caravan outlet trips or the plug body melts overnight
- Granny cable adding only 10-12 km of range per hour
- House breaker trips whenever the car and oven run together
- Solar exporting to grid while the car sits uncharged

## Common causes
- Charger drawing continuous 15 A on a general power circuit
- No dedicated RCBO circuit from the switchboard
- Switchboard has no spare pole for a 32 A EVSE circuit
- No load management or CT clamp installed at the mains

## How we handle it
1. **On-site assessment** — We measure the cable run, confirm phase availability and check the switchboard has room for a dedicated 32 A RCBO.
2. **Ausgrid notification** — For high-demand connections we lodge the paperwork so your local network operator is on record.
3. **Board prep** — If the board is full we upgrade it or install a sub-board so the EVSE gets its own protection.
4. **Cable run and mount** — We pull the dedicated cable, mount the charger, and seal all penetrations to weatherproof standard.
5. **Commission and load-balance** — Charger paired to Wi-Fi or app, load balancing configured against your main supply so it throttles instead of tripping.
6. **Test and certify** — Full AS/NZS 3000 test, Certificate of Compliance issued, and we walk you through scheduling and solar-only modes.

## Applicable standards
- AS/NZS 3000:2018 Section 7.9 — Electric vehicle charging installations
- AS/NZS 61851 — Electric vehicle conductive charging system
- NSW SIR 2019 — high-demand connections

## Seasonal note
Solar-diverting installs pay back fastest through daylight-saving months — book Sept-Feb to capture peak PV self-consumption.

## Recent anonymised jobs
### Solar-diverting Zappi install
Homeowner in Hurlstone Park with a 6.6 kW rooftop array wanted to charge only from excess solar. We wired a Zappi charger, added the CT clamp on the mains, and configured Eco+ mode so the car sips only spare PV. Working in Federation cottages in Hurlstone Park means access and cable pathways get sorted first — it saves patching later.
Outcome: Free daytime charging from surplus solar, app-managed schedules.. Approx. 300 minutes on site.

### Three-phase fast charger for a townhouse
A new EV owner in Hurlstone Park wanted faster charging than single-phase could offer. We confirmed three-phase supply was available, ran a dedicated circuit with the correct RCBO and mounted an 11 kW charger in the carport. Hurlstone Park falls inside postcode 2193 on our Canterbury-Bankstown route, so we quote up front and finish to AS/NZS 3000 with a compliance certificate.
Outcome: 11 kW three-phase charging, CCEW issued, full charge overnight.. Approx. 280 minutes on site.

## FAQs
**Do I need a three-phase supply for an EV charger?**
No - single-phase 7kW is fine for most homes and adds ~40km of range per hour. Three-phase 22kW is faster but only makes sense if you drive high daily kms or have solar to divert.

**Can I install a charger myself if I bought one online?**
No. EV charger install is licensed electrical work in NSW - a Certificate of Compliance is required. DIY installs void insurance and warranty.

**Will it work with my solar?**
Yes - Zappi, Fronius Wattpilot and select others charge only from excess solar automatically. We spec and wire them to talk to your inverter.

**How long does installation take?**
Most single-phase installs are done in 3-5 hours. Complex runs, three-phase, or switchboard upgrades can extend to a full day.

**Which EV charger brand do you recommend?**
It depends on the car and the goal. Tesla Wall Connector is unbeatable for Teslas. Wallbox Pulsar Plus is a great all-rounder. Ocular is the budget pick. Zappi and Fronius Wattpilot are the two best solar-diverting chargers. We stock all of them and quote on merit, not commission.

**Do I need to upgrade my switchboard for an EV charger?**
Not always. If your board has a spare pole, sound tails and adequate main capacity, we just add a dedicated RCBO. If it's a ceramic-fuse board or full to the brim, an upgrade is usually needed — we quote both jobs together up front so there are no surprises.

## Reviews
Aggregate: 5/5 across 195 Google reviews.
- Shirish Shetty (5/5, 2026-06-01): Absolutely outstanding electrician and genuinely one of the best people to work with. He diagnosed and fixed the issue within a couple of hours. He was professional, efficient, and reliable.
- Jie Z (Jessica) (5/5, 2026-06-01): VERY HIGHLY recommend! We had an issue with power at home and needed someone urgently to restore the electricity service. They responded quickly, showed up on time, and got everything back up and running without any hassle.
- Vin J (5/5, 2026-03-01): I highly recommend Joe, he's very skilled, kind and does honest work. He did a massive last minute job for us, installing an entire 17.4kw ducted aircon system after our old unit broke.
- Jennifer Cornish (5/5, 2025-11-01): Exceptional Service - Highly Recommend! I contacted Joe from Empire Electrical to install new powerpoints and downlights. His professionalism, punctuality, and thoroughness stood out.
- Jasmin Cumming (5/5, 2025-07-01): I am so glad I called Empire Electrical. Joe is a very honest person which is hard to come by. He explained everything to me and charged me an incredibly fair price.